Technische bijstand
Wij willen duidelijkheid verschaffen over de belangrijkste technische vragen die kunnen opduiken over de werking van onze producten en de stappen die nodig zijn voor de montage ervan.
Montage
The following video shows how you can easily install a Holdy hanger.
The Sekure bracket can be assembled and disassembled easily without the need for tools, thanks to a manual closing plate that frees the steel pivot.This pivot is put into the bracket, with the short 7.5 mm part remaining within the bracket and the longer 10 mm part is put into the side of the furniture.The plate of the bracket slides, makes it possible to lock the pivot in order to turn the furniture with the shelf assembled, without falling, which facilitates transport.
Yes, this bracket makes it possible to block the shelf in order to turn the furniture with the shelf assembled, without falling, which facilitates transport. Likewise, the shelf can be assembled and disassembled easily without the need for tools, thanks to a manual closing plate that frees the steel pivot.
In the following summary table, you can find the technical and functional characteristics of the joining systems for Emuca furniture:
The diameter of hole that is used for the euro screws is 5 mm, as prior drilling is required to assemble those screws.
The joining systems for furniture found in our catalogue are organised in this list according to their strength, from strongest to least strong: * **Eccentric Ø35.** They are used for joining beams on beds or similar furniture that requires stronger joints. * **Rostro.** They are mainly used on wardrobes or furniture where the aesthetic is of great importance, thanks to their innovative design. * **System.** They are used on a wide range of wardrobes and pieces of furniture. * **Eccentric.** They are applied to the majority of home furniture.
M8 or M8x1 refers to the metric thread and thread pitch of a screw.In the European market the 1.25 mm thread is common and it is named M8.On the contrary, when dealing with a fine 1 mm screw thread, M8X1 is used.In the Italian market a different name is used, 8MA for M8 and 8MB for M8X1.
In order to know if a screw is compatible with a nut or stud bolt are compatible, we have to look at the internal thread of the screw and at the thread of the nut or stud bolt, which must coincide.For example, if we choose a nut or stud boy with a 6 metric screw thread (M6), the screw also has to have an internal metric thread of 6 (M6).
